Curbface Filler Forms for Metal Forming
Our curbface filler forms, both straight and radius, are designed to fill in curbface lengths between the curbface forms when that space is less than 10-feet long.
Two curbface filler forms offered:
- Straight
- Radius
Typical Applications:
- Street side traffic barriers
- Roadways
- Parking lot barriers
- Driveway barriers
Specs & Sizes for dee’s Curbface Filler Forms
Curbface filler forms are manufactured to match any curbface specification.
Straight Curbface Filler Forms
dee's straight curbface filler forms slip over each of the top rails of the two straight curbface forms to be connected. The bottom of the straight curbface filler form is locked into place by inserting the bottom edge of the curbface filler form into the clip welded onto to the bottom of the division plate. This locking action prevents the bottom of the curbface filler form from pitching out when concrete is poured into the curb and gutter form system. A top spreader is used to lock the curbface filler form firmly into place to complete the setup process.
Straight curbface filler forms are manufactured out of 12-gauge steel and come in standard 5ft. sections.
Radius Curbface Filler Forms
dee's radius curbface filler forms are fastened to radius curbface forms using a filler form lock (dee product #688). The bottom of the radius curbface filler form is locked into place by inserting the bottom edge of the curbface filler form into the clip welded onto to the bottom of the radius division plate. This locking action prevents the bottom of the curbface filler form from pitching out when concrete is poured into the curb and gutter form system. A rotating clip attached to the top of the radius division plate is used to lock the radius curbface filler form firmly into place to complete the process. Top spreaders are used to lock the curbface filler form firmly into place to complete the system, if the curbface filler form is being used for a double radius curb and gutter application.
Radius curbface filler forms are manufactured out of strips of 10-gauge cold rolled steel formed to the correct batter specification and fastened together using a steel strip. They come in standard 5ft. sections.
| Description |  Product # |
|---|---|
| Straight curbface filler form | 241 |
| Radius curbface filler form | 517 |
 |
|
|---|---|
Quickly fills gaps between curbface forms |
Avoid "free forming" the curbface by hand |
Alternative to repetitive use of wood or Masonite filler forms |
Save labor and materials expense |
Precisely and accurately fills gaps between curbface forms |
Ensures the profile will pass inspection |
