Curb & Gutter Curbface Forms for Metal Forming
dee's curbface forms are used as a component in its curb and gutter form setups, specifically to create the face of concrete curbs.
Four common curbface styles offered:
- Vertical Face (Type A)
- Batter Face - no radius (Type B)
- Bottom Radius (Type J)
- Top and Bottom Radius (Type S)
Typical Applications:
- Street side traffic barriers
- Roadways
- Parking lot barriers
- Driveway barriers
Specs & Sizes for dee’s Curb & Gutter Curbface Forms
10 ft curbface forms are made from heavy gauge metal and are fabricated to meet the desired customer profile. Dimensions for curb and gutter curbface forms are determined by the specifications for each individual project.
Straight Curbface Forms
Straight curb and gutter curbface forms are fabricated out of a single piece of 10 or 12-gauge steel. The base of the straight curbface form is held in place by a clip welded onto the division plate. The top is held in place by a top spreader that firmly clamps the face form to the back form.
Radius Curbface Forms
Radius curb and gutter face forms (#516) are fabricated out of individual steel plates formed into the required profile. Then the individual plates are joined to form a 10-feet long radius curbface form.
The bottom of the radius curbface form is held in place by a clip welded to the radius division plate. The top of the radius curbface form is held in place by a rotating clip built into the radius division plate.
Place your mouse over a product number in the table to reveal the product image.
| Description |  Product # |
|
|---|---|---|
| Straight curbface form | 240 | View Part |
| Radius curbface form | 516 | View Part |
 |
|
|---|---|
Meet any specific profile requirements |
Ensures placements pass inspections |
Matches any desired profile |
Reduces hand-tooling work |
Easily stripped from the form setup |
Complete required finishing work without removing the complete forming system |
Built to provide many years of service |
Reduces long-term form expenses |
